|
|
|
|
Communication between Siemens 1500 and Exchange
|
|
Siemens 1500 communicates with the switch. You need to find the robot supplier to give you the GSD in the Botou. Then you can install the XML of GSD in the Botou toolbar - Manage the General Station Description File. Then you can find the GSD in the Botou device and network directly. Open the other field devices on the right side and find the GSD in the Botou toolbar. Pull it directly into the network, and then assign the robot to the CPU network. Switches do not need configuration. Switches essentially extend the functions of network ports, signal amplification and network management, and do not involve configuration.
It is suggested to use PROFIBUS to communicate with robots. The robots also need to configure GSD files.
Configuration does not require configuration switches, and all devices can be directly on a network.
|
|
|
|
|
|
|
|
|